Which 1/2 inch tubing is better?

[ScissorClaw]

I went to Home Depot today and got some tubing for my water system. Here's my question...My system is 1/2 inch all through and through. So I got 1/2 inch ID, but I was stuck between choosing the 3/4 or 5/8 inch for the OD. Is one better than the other for what we are doing? I'd much rather use the 5/8 inch as it is more bendable and easier to work with...Any Comments?

[Kabooka]

Welcome to Liquid Ninjas ! :drinky: :drinky:

Either will work - if you can't route the hoses well enough to avoid sharp bends which will result in kinks - use the one that you can bend in the tightest radius without kinking the tube

[Spazzonater]

At home depot i only found two differnt types clear and braided i didn't see any of that but as long as you make nice curves and bends you shouldn't have to worry to much.

[Kona]

I recommend ClearFlex 60 Premium Tubing.

Long service life - non-aging, non-oxidizing
Smooth inner wall resists build-up
Soft and flexible - easy to slip over fittings
Tight bend radius
Outstanding flex life

[ralf_c]

Originally posted by Kona
I recommend ClearFlex 60 Premium Tubing.

Long service life - non-aging, non-oxidizing
Smooth inner wall resists build-up
Soft and flexible - easy to slip over fittings
Tight bend radius
Outstanding flex life

ditto

[Reds]

ditto that ditto