PDA

View Full Version : problem with Asus Probe utility..

notoriousformula
07-01-2003, 02:50 AM
hey guys, i have Asus A7N8X Deluxe Mobo and i installed the Asus Probe utility which shows current CPU temp and fan speeds. so when i install it it gives me an error: can't find Lmcontrol Procedure :confused:

any ideas?

regards

notor
sptw
07-01-2003, 02:57 AM
Hi notoriousformula,

Try MotherBoard Monitor (http://mbm.livewiredev.com/).It's more accurate.
notoriousformula
07-01-2003, 03:11 AM
Originally posted by sptw
Hi notoriousformula,

Try MotherBoard Monitor (http://mbm.livewiredev.com/).It's more accurate.

thanks Sptw. it won't execute either, same error :cry:

notor
sptw
07-01-2003, 03:18 AM
WOW both two :eek: ?

well, sorry NF to not help you in this moment, but i'll try to do a research on it.
notoriousformula
07-01-2003, 03:51 AM
Originally posted by sptw
WOW both two :eek: ?

well, sorry NF to not help you in this moment, but i'll try to do a research on it.

ok i got the MBM workin, but the sensors and fan dividers are confusing me, the cpu and mobo temps are totally diff. than in bios:confused:

plzz help :(

notor
sptw
07-01-2003, 05:11 AM
Notorius,

look at this page (http://mbm.livewiredev.com/comp/asus.html) and take an attention on "motherboard (your A7N8X) and "Sensor chip", "Case Sensor" and finally "CPU Sensor".They are the correct one for your mobo.Select them on appropriate section on MBM monitor and you're done.
notoriousformula
07-01-2003, 06:09 AM
Originally posted by sptw
Notorius,

look at this page (http://mbm.livewiredev.com/comp/asus.html) and take an attention on "motherboard (your A7N8X) and "Sensor chip", "Case Sensor" and finally "CPU Sensor".They are the correct one for your mobo.Select them on appropriate section on MBM monitor and you're done.

hey Sptw, how's this?
notoriousformula
07-01-2003, 06:10 AM
here is the pic..damn i always forget the pic..
sptw
07-01-2003, 09:58 PM
Hi Notorius,

Open MBM5.Choose settings.Now on MBM5 screen choose temperatures and open Should display board sensor option.Now set the correct one in accord with your mobo (follow those link above).Do the same for sensor 2 and for voltages and fans options.
Facedeharicot
07-01-2003, 11:42 PM
.
Drake
07-01-2003, 11:45 PM
:D:DWELCOME:D:D to Liquid Ninjas, Facedeharicot!
Facedeharicot
07-01-2003, 11:51 PM
thank you :D

in my opinion Asus prob is a bad programm :2guns:

MBM5 is really better
sptw
07-02-2003, 12:03 AM
Welcome to the board Facedeharicot :)
Drake
07-02-2003, 12:13 AM
I use Asus Probe and it does everything I need. Its temps are always within a degree of BIOS and MBM5, so I'm happy with it. MBM5 just has a bunch of utilities that I don't use so I find it more cumbersome than helpful.
Synthohol
07-02-2003, 01:03 AM
:D:DWELCOME:D:D to Liquid Ninjas, Facedeharicot!
and :bday: :bday: Happy 16th to boot!::bday: :bday:
notoriousformula
07-02-2003, 03:21 AM
:D :DWelcome:D :D to LN Facedeharicot, and thanks for your advise.
yeah, i kinda figured out MBM5 and its running fine now. the temps shown are almost in range of the bios temps.

i also figured out that if you run both(MBM5 and Probe) together, they crash on each other. like they use some same file or some sensor. i was actually comparing the temps on both.

Drake, Sptw: thank you guys, both programs are workin fine now ;) .

notor:P
Facedeharicot
07-02-2003, 09:51 AM
:partygrn::partygrn:Thank you all:partygrn::partygrn:
:partygrn::partygrn: