MODing PSU with blue LED internal illumination

[IAMSUPERMAN]

I just saw the True480 power supply with blue LED internal illumination and i like.
but i prefure the 550W Enermax.
my question is seeing as i was gonna change the stock Enermax cover with a plastic see thu. is there any way to connect a led fan into the power unit or is the true special?

[Farabomb]

It may not be the same connection (3pin) but if you can get it wired it'll work fine.

[Drake]

Seeing as your fans get power from the PSU, this shouldn't be a problem :rolleyes:

Wiring would be the hard part. As Fara said, I doubt it's a standard connector. If you have rudimentary soldering skills and aren't afraid to work around high voltages, go right on. However, opening a power supply can be fatal (or at least lead to very painful injuries) so be extremely careful if you decide to wire in a new fan.

[IAMSUPERMAN]

ok
thanks if i go off line you guys will know why!
:rolleyes:
ill get some pics and let you guys know

[WackyComputer]

<lazy>Tape off the old wires and connect the new fan to a molex connector.</lazy>
:cool3:

[Drake]

Good idea... don't cut off the old fan at the PSU board, but at the fan. Just put a moxel/3pin on there and make your coice of fan :)

[IAMSUPERMAN]

COOL!!!
it should be a nice pro look.
thanks