IAMSUPERMAN
02-13-2003, 09:00 AM
yes im back
i found a delta 120x38 that puts out 190cfm put has a 59dbl
to cool my xtream II dont think ill need all that power but i think its nice to have and i think that with the fan controlls i should be able to keep the noise down.
i was making some calculations cus i got 2 radiator for my 2 loop system
This is the system so far
For loop one
Ill be using ½ tubing being pumped by
1250 Eheim 310 gph into a Danger den cpu maze 3 for an Intel P4 3.06 block cooler with tec into a Reservoirs going into a Black Ice Xtreme using one telta 120x38 fan to push air thru it.
For loop two
Ill be using the 3/8 tubing
Pumped by a another 1250 Eheim 310 gph for a Gemini nfoce4 gpu with TEC and gpuram cooler going into it a Reservoir then into a danger den system chip cooler back to another Reservoir then into RAM AQUA SINK out going into another Reservoir then to a Black Ice Xtreme using one delta 120x38 fan to push air thru it.
I know this is a big loop but but im building a clear full tower case and want to show off all that water with lots of light to boot also I am hopping the larger pump and the additional second large radiator offset the size of the loop and dispense the heat evenly
i originally was going with just 3 120x25 for the tower intake till i noticed that their max power was 69.15 cfm which means i got to double my intake to accomodate max OC exhoust.oy
Thank god i went with a full tower I think i might be able to squeez it all in , or on it , or around it. hehe.
but im still keeping the whole dam thing symmetrical.:>
AND i thought soccrstar was just kidding:>
I just know i am going to go def with all this fan noise.
Any comments? Please advice
i found a delta 120x38 that puts out 190cfm put has a 59dbl
to cool my xtream II dont think ill need all that power but i think its nice to have and i think that with the fan controlls i should be able to keep the noise down.
i was making some calculations cus i got 2 radiator for my 2 loop system
This is the system so far
For loop one
Ill be using ½ tubing being pumped by
1250 Eheim 310 gph into a Danger den cpu maze 3 for an Intel P4 3.06 block cooler with tec into a Reservoirs going into a Black Ice Xtreme using one telta 120x38 fan to push air thru it.
For loop two
Ill be using the 3/8 tubing
Pumped by a another 1250 Eheim 310 gph for a Gemini nfoce4 gpu with TEC and gpuram cooler going into it a Reservoir then into a danger den system chip cooler back to another Reservoir then into RAM AQUA SINK out going into another Reservoir then to a Black Ice Xtreme using one delta 120x38 fan to push air thru it.
I know this is a big loop but but im building a clear full tower case and want to show off all that water with lots of light to boot also I am hopping the larger pump and the additional second large radiator offset the size of the loop and dispense the heat evenly
i originally was going with just 3 120x25 for the tower intake till i noticed that their max power was 69.15 cfm which means i got to double my intake to accomodate max OC exhoust.oy
Thank god i went with a full tower I think i might be able to squeez it all in , or on it , or around it. hehe.
but im still keeping the whole dam thing symmetrical.:>
AND i thought soccrstar was just kidding:>
I just know i am going to go def with all this fan noise.
Any comments? Please advice