Mobile Athlon Xp 2600 Overclocking HElp

[Bacchuas[Ak-49]]

Hey
I have an athlon 2600 mobile and have only been able to overclock it to 2400 mhz @ 12 x 200 with 1.5 volts and its a little unstable, i have a chaintech 7njs mobo nforce 2 and 512 corsiar pc 3200 XMS CL2. i havent been able to clock it any hihger successfully,

Any ideas?

Thanks

[Synthohol]

up the volts to 1.6:)
i cranked my 2600 mobile to 1.9 and got 11x240 almost stable.
11x220 and 1.8-1.85v is just fine, just watch your temps.
11,2,2,2 mem timings are preferred as well, the nforce board loves it :)
the 2600 mobile has a max temp of 90c before it bursts into flames;)
40-50c is fine. what cooling are you using? ie:hsf, water.....?
dropping the multiplier to 11 will help allow extra fsb which is where the real speed is at.

[BurntMayhem]

hey,
I have a 2600m on a ga-7nnxp with the swiftech 22501 watercooling kit. I managed to get it to 2.73ghz with 195 * 14 @1.91V. i found that a higher multiplier and a low fsb helped with stability and reaching a higher overclock.

[Datsin]

it shouldnt.. unless you have crap ram.. ie 2700 stuff instead of 3200.. all 3200 ram should run @ 200 fsb. if not more.

[Synthohol]

I CAN RUN 11X240@5,2,2,2, AND IT SEEMS FINE ON WATER@45c
sorry for shouting, i hit capsloc by mistake:)
nf7-s with tic-tacs mantaray cpc off bios.
if you still run the stock bios that might be an issue ;)